Fuse chart labelA
FusesB
CHANGING A FUSE
WARNINGS
Do not modify the electrical system
of your vehicle in any way. Have
repairs to the electrical system and
the replacement of relays and high current
fuses carried out by a properly trained
technician.
Switch the ignition and all electrical
equipment off before touching or
attempting to change a fuse.
CAUTION
Fit a replacement fuse with the same
rating as the one you have removed.
Note:
You can identify a blown fuse by
a break in the filament.
Note:
All fuses, except high current
fuses, are a push fit.
Note:
A fuse puller is located in the
engine compartment fuse box.
FUSE LABELS
The fuse chart label located on the rear
side of the panel trim will help you identify
the fuses. Depending on the vehicle
variant the necessary fuses and relays
may vary.
The fuse chart label shows rectangles
representing a fuse or relay. The following
information is shown in the rectangles:
To Next Page
Loading...
