-127-
Audio
ANTI-THEFT SYSTEM
Your vehicle’s audio unit has an
integrated antitheft system to deter
theft. The system is designed to make
the unit inoperable if it is stolen. This
system will be activated if the power
source is ever disconnected from or in
any way interrupted to the audio unit.
If the antI-theft system is activated, the
audio system will not operate when
reconnected to a power supply, and
“CODE” will be displayed until the correct
code number is input.
System deactivation
Press the power/volume dial.1.
Input the code number by the 2.
pressing channel preset buttons 1,
2, 3, and 4.
Note: Press 1 for the rst digit, 2 for the
second, 3 for the third, and 4 for the
last digit. For example, if your number is
4213, press 1 four times, 2 two times, 3
one time, and 4 three times. If the display
closes while inputting, begin from Step 1.
Press channel preset button 5 to 3.
conrm that the password has been
entered and to access the initial
operation screen.
Note: The unit will lock for 60 minutes
if an incorrect password is entered four
times consecutively.
Store the 4-number ID code card so as
not to lose it.
To Next Page
Loading...
