-131-
Audio
OPERATING THE RADIO
Press the band selector button to turn
the radio on.
Band selection
Choose FM1, FM2, FM3, AM1 or
AM2 by pressing the BAND button.
The selected mode will be indicated. If
FM stereo is being received, “ST” will be
displayed.
Note: If FM broadcast signal becomes
weak, reception automatically changes
from STEREO to MONO for reduced
noise, and the “ST” indicator will turn off.
Tuning
The radio has the following tuning
methods: Manual, Seek, Preset channel,
and Auto memory tuning. The easiest
way to tune stations is to set them on
preset channels.
To Next Page
Loading...
