Ford ZD Escape Series - Checking the Wiper Blades; Changing the Wiper Blades

-36-
Wipers and washers
CHECKING THE WIPER
BLADES
Run the tip of your ngers over the edge
of the blade to check for roughness.
Clean the wiper blade lips with water
applied with a soft sponge.
CHANGING THE WIPER
BLADES
Fold back the wiper arm and 1.
position the wiper blade at right
angles to the wiper arm.
To remove, press the retaining clip 2.
(A) to disengage the wiper blade,
then pull the blade down toward
the windshield to remove it from the
arm.
Install the new wiper blade on the 3.
arm and press it into place until a
click is heard.