-85-
Installing the cross-bar
assembly to the roof rack side
rails
Ensure that both cross-bar 1.
assemblies are installed with the
F (front) arrow facing towards the
front of the vehicle.
Depress the tongue in the endcaps 2.
on both sides of the cross-bar.
Slide the tie down loops and the 3.
cross-bar assemblies over the end
cap tongue and into the side rails
Tighten thumb wheel at both ends 4.
of the cross-bar.
Removing the cross-bar
assembly from the roof rack
side rails
Loosen the thumb wheel at both 1.
ends of the cross-bar (both cross-
bars are adjustable).
Slide the cross-bar to the end of the 2.
rail.
Use a long, at object in order to 3.
depress the tongue in the endcaps
on both sides of the cross-bar.
Slide the cross bar assembly and 4.
the tie down loop off the end of the
rail.
Load carrying
To Next Page
Loading...
