Quick Fire Sawhorse 7
Safety
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully. Note the safe operational
requirements, warnings & cautions. Use the product correctly and
with care for the purpose for which it is intended. Failure to do so
may cause damage and/or personal injury and will invalidate the
warranty. Please keep these instructions safe for future use.
Before using the sawhorse always check that all nuts and bolts are
secure and that the sawhorse is not damaged.
Use the sawhorse on firm level ground only. Do not use on sloping
or uneven ground. Use the ground anchors for maximum stability.
After securing a log in the sawhorse, check the stability and
balance before starting to cut. The sawhorse must not be able to
tilt.
Read and observe the operating instructions of the chainsaw you
are using and wear all recommended safety gear. Always wear
safety shoes or boots in case a log is accidentally dropped on your
feet.
Only cut with the bottom of the chainsaw bar as the log may
otherwise shift away from the rotating chain, become unstable and
increase the risk of personal injury.
Clear and stack the sawn logs away from the sawhorse to keep the
work area clear of obstructions and safety hazards.
WARNING: Do not exceed the specified maximum log length
and maximum log weight as given on page 2 of this manual.
To Next Page
Loading...
