EN
Insert the USB charging cable connector into the available USB port of the computer, and
connect the Type-C interface to the headset at the other end for charging.
Insert the 3.5mm connector into the 3.5mm interface available on the computer, and connect the other end to the
headset jack.
1. Keep the distance between the mobile phone and the headset within one meter, the closer the better;
2. Press and hold the "POWER" button to power on, the headset default the BT mode, at the time, you see the indicator
ashes “blue-red-red”;
3. Turn on the Bluetooth function of your devices, search for the "FORGEON Captain", click and connect, and the
indicator slow ashes blue light.
Installation with 3.5mm jack cable
Installation with Bluetooth
CHARGING CONNECTION
Triple-click the “POWER” button to switch the 2.4G mode, and the indicator ashes “blue-red-red”, plug the 2.4G receiver
into the USB interface of the device, and connected successful.
Installation with 2.4Ghz wireless receiver
SETUP
To Next Page
Loading...