as the items keep their original characteristics. Therefore, it is important that no modifications or repairs are made: do not
tamper with your boots.
- If the fixing devices consist of strips, straps, elastic bands, hooks or alike, both their efficiency and their sealing must be
verified. If a Velcro closure is present, it should be checked for wear and tightness at regular intervals.
CARE, MAINTENANCE, STORAGE
- Remove dirt with a damp cloth only; for heavier soiling use damp cloths or soft brushes with lukewarm water (max 40°).
- Do not wash under running water.
- Do not use hot water, solvents or other chemicals.
- Use specific products for cleaning and maintaining leather.
- Do not leave exposed to direct sunlight.
- Do not leave exposed to extremely high or low temperatures.
- Never tamper with the boots in any of their parts.
- When not in use, the boots must be stored in a dry and well ventilated place.
- After use leave them dry in a well ventilated place, at room temperature; do not use dryer or other heating devices.
If the boots are damaged, or if there is any doubt about their condition they should be replaced immediately.
Complaints or replacement requests for which it has been established improper use will not be accepted.
INNOCUOUSNESS
All the materials used, of both natural and synthetic origin, as well as the processing techniques applied, have been
chosen to meet the requirements set forth in the European technical regulation in terms of safety, ergonomics,
comfort, solidity and innocuousness.
FIT & ERGONOMICS
When choosing your boots, select a pair that is the correct size and comfortable in your usual riding position. Please ensure
that you are able to easily operate your motorcycle controls.
In order to choose the correct size please check your foot measurements or consult your dealer.
In order to fully benefit from the protection offered by your boots, you should ensure that:
- The closures are fully fastened and fixed securely in place prior to mounting your motorcycle.
- Additional checks should be carried out to ensure that there are no loose or free-hanging ends that could be caught up in
the vehicle’s mechanisms whilst riding.
- The main closures and restraint mechanisms of these boots should always be securely fastened when in use while riding
a motorcycle. Otherwise, the boots’ ability to provide protection in the event of an accident may be severely reduced.
- Never ride with main closures open during hot weather.
- Choose the correct size: loose or tight boots may hinder freedom and range of movements resulting in dangerous riding
conditions.
The retailer can provide you with further detailed information and assist you with advice on fit and adjustment.
DURATION AND DISPOSAL INSTRUCTIONS
The product lifetime is strictly related to its use and consequent material degradation.
At the end of your boot useful life be sure to not discard it in the natural environment: please follow your local / national
environmental regulations and discard it in an appropriate dumping area. Further information regarding these regulations
can be obtained from your local authorities.
To Next Page
Loading...