Machine Purpose: To Form heated plastic around a mold
Safety: Must wear safety glasses while operating machine. Beware of objects that dangle and
could get caught in platen. Beware of hot plastic, fast moving parts and pinch points. This machine has
no built-in safety system.
Materials: Thermoset Plastics
Machine Specs: 24x24 raw material, 22”x22” working area, 12.8” draw depth .25” thick material, 6
heating zones
Accessories: 22”x22” & 10”x10” working area window sets (24”x24” & 12”x12” raw stock)
Instruction Required: Individual Checkout
Formech 686
To Next Page
Need help?
General
