4
A locking device not correctly adjusted can cause the wheel detachment..
• After inserting the wheel, first screw the wheel pin (1) to 18 Nm, then tighten the
safety lock nut (5). The lock nut has a left-hand thread so it is screwed counterclock-
wise and unscrewed clockwise.
•Before riding, verify that the brakes on your bicycle are installed and adjusted cor-
rectly. Improperly installed and adjusted brakes may cause a crash and result in
property damage, serious injury, or death.
•Make sure cables and hoses do not impede the steering of the bicycle.
•When using the bicycle in the wet, remember that the grip of the tires on the ground
decreases, making it more difficult to control the vehicle. Furthermore, it must be
borne in mind that due to the progressive drying of the braking surface during brak-
ing, the braking power may vary abruptly, so pay more attention when driving in
wet conditions to avoid possible accidents. NERO forks are not designed for use on
public roads.
•NERO forks are designed for competitive off-road riding and racing.
5 1
4 1
3 1
2
1
1 1
Pos DENOMINAZIONE COMPONENTI - PART NAME Q. CODICE / CODE
LOCK NUT with LEFT HAND THREAD SB-B043-05
SHIM FOR CONICAL AXEL SB-R052-15
CONICAL BUSH WHEEL AXLE SB-B035-05
AXLE BUSH Ø20 SB-B037-05
WHEEL AXLE CONICAL SEAT Ø20 DH SB-P089-05
4
3
1
Legs
2
5
Use the tightening
torque marked on
the pin surface.
To Next Page
Loading...
