To Next PageTo Next PageWhat to do if my Forno Dishwasher won't start?
If your Forno Dishwasher isn't starting, there are several potential causes: * Ensure the door is completely shut and properly latched. * Verify the power supply is correctly connected. * Check if the Delay Start option is activated. * If it's a selected model, the Child Lock might be on.
How to fix spots and filming on dishes from Forno WQP12-6502?
If you're seeing spots and filming on your dishes after using your Forno Dishwasher, here's what might be happening: * Your water hardness may be too high; consider installing a water softener if you have extremely hard water. * Dishes might be improperly loaded; reload them according to the manual. * You may be using old or damp rinse aid; use fresh rinse aid instead. * The rinse aid dispenser might be empty; add rinse aid to the dispenser.
What to do if dishes are not drying enough in my Forno Dishwasher?
If your dishes aren't drying adequately in your Forno Dishwasher, check the following: * The detergent dispenser might be empty; fill the rinse aid dispenser or increase the amount of rinse aid. * The dishes might be improperly loaded; reload them according to the manual. * The selected cycle might not include drying; choose a cycle that includes drying.
Why is my Forno WQP12-6502 operating for too long?
Several factors can cause your Forno Dishwasher to run longer than expected: * The dishwasher might be connected to a cold water supply. Ensure it's connected to hot water. * The cycle time automatically increases when heavy soil is detected in auto, normal, and pots & pan cycles. * If the sanitize option is selected, the cycle time will increase to reach the required temperature.
Why are my dishes not clean enough after using my Forno Dishwasher?
If your dishes aren't getting clean enough in your Forno Dishwasher, consider these possibilities: * Low water pressure can be a factor; use the dishwasher when the water pressure is normal. * Insufficient inlet water temperature; ensure the dishwasher is connected to a hot water supply and avoid using it when hot water is being used elsewhere. * Overcrowding the dishes or improper detergent use; reload the dishes properly and use fresh detergent, adjusting the amount based on water hardness and the selected cycle. * The selected cycle may not be suitable for the soil level; choose a longer washing cycle. * Spray arms might be blocked; make sure they can rotate freely.
Why is there detergent left in the dispenser cup of my Forno Dishwasher?
If you find detergent remaining in the dispenser cup of your Forno Dishwasher, it could be due to: * The detergent being too old; use fresh detergent. * A blocked spray arm; ensure the spray arms aren't blocked when loading dishes.
What causes etching on dishes in my Forno Dishwasher?
Etching on dishes in your Forno Dishwasher can be caused by: * Using too much detergent, especially if you have soft water; use less detergent. * The inlet water temperature being too high (exceeding 150 ?); lower the inlet water temperature.
Why is the Rinse Aid light on in my Forno WQP12-6502?
The rinse aid light turns on in your Forno Dishwasher because the rinse aid level is low. Add rinse aid to resolve this issue.
General| Type | Built-In |
|---|---|
| Capacity | 12 place settings |
| Number of Programs | 6 |
| Control Type | Electronic |
| Energy Star Compliant | Yes |
| Child Lock | Yes |
| Delay Start | Yes |
Instructions for correctly installing the dishwasher, including grounding and water temperature.
Essential safety precautions to follow before operating the dishwasher for the first time.
Details the capacity, dimensions, weight, power supply, and water pressure of the dishwasher.
Explains the multi-filter system for separating soiled and clean water for better performance.
Describes how the upper rack height can be adjusted to accommodate taller dishes.
Details the system that automatically selects wash cycles based on load size and soil level.
Lists and describes the available wash cycles like Pots & PANS, Normal wash, China crystal, etc.
Explains special functions like Air exchange, Steam wash, Child lock, Vortex wash, Heated Dry, Sanitize, Hi Temp Wash.
Explains the function of Start/Cancel, Delay, Display Window, and indicator lights for rinse aid, sanitization, and cleaning.
Describes the lights that indicate the current stage of the wash cycle: Wash, Dry, and Clean.
Explains how to load spoons, knives, and forks into the three-module silverware basket.
Details the safe procedure for adding dishes after the wash cycle has started.
Guides on how to fill and adjust the rinse aid dispenser for better drying and spot prevention.
Guides on how to fill and adjust the rinse aid dispenser for better drying and spot prevention.
Explains how to open and fill the detergent dispenser for the main wash compartment.
Lists possible causes like door not closed or power issues, and solutions for starting the dishwasher.
Addresses issues with cleaning performance due to loading, detergent, or cycle selection, offering solutions.
Explains causes for poor drying, such as water hardness or loading, and provides corrective actions.
Covers causes like water hardness or rinse aid issues, and solutions for achieving spotless dishes.
Discusses causes of etching on dishes, such as high water temperature, and suggests preventative measures.
Addresses issues with the detergent dispenser, including causes like old detergent or blocked spray arms.
Explains possible causes for the detergent dispenser not closing properly and suggests solutions.
Covers issues with draining, such as clogged drains or kinked hoses, and provides solutions.
Addresses excessive suds caused by improper detergent use and recommends using appropriate detergents.
Discusses potential causes for leaks, such as an unlevel dishwasher, and advises on solutions.
Explains that marks can come from aluminum utensils or water temperature and suggests alternatives.
Covers causes of staining like coffee/tea or tomato food, recommending cleaning methods and rinse cycles.
Describes normal operational noises and when to call for service if persistent unusual noises occur.
Addresses issues with the dishwasher not filling, such as a closed water valve or door latch problems.
