Förster-Technik TAP5-VS2-50 - Communication; Printer; Network Configuration; Cloud

Setup 69
3. Confirm your entry with .
5.11 Communication
5.11.1 Printer
Current animal lists can be generated via the automatic feeder’s printer function.
• Serial: Select this option if you have connected a printer to the automatic feeder via the se-
rial interface.
• CAN: Select this option if the printing data is to be sent via the CAN bus. In this case, a PC
program will play the counterpart.
5.11.2 Network configuration
Here you can configure all parameters of the network.
• (M) MAC address: Here you can see the MAC address of your network. Your processor
card is uniquely identified via its MAC address. This address cannot be changed.
• M-ECN: Here the check sum of the MAC address is displayed.
• (IP) IP address: Here you can see the IP address of your processor card and if necessary
change it.
• (SN) Subnet mask: Here you can see the subnet mask of your network and if necessary
change it.
• (GW) Gateway: Here you can see the IP address of your gateway and if necessary change
it.
• IP assignment: If you set the value here to DHCP, your processor card will try to get its IP
address from a DHCP server in your network. If you select static here, you will have to set
the IP address of your processor card yourself, in consultation with your IT specialist.
Note: If after 10 seconds no IP address has been set by the DHCP server, the IP address
169.254.2.1 will be used automatically.
• Accept?: Press here . The data will be saved.
5.11.3 Cloud
Here you can change the values for the CalfCloud and the automatic feeder's Internet connec-
tion to the cloud.
1. In start?, press . You then create the connection between the cloud and the automatic
feeder.
2. You will see the message You hereby accept the data protection provisions listed on
www.calf-cloud.com!.
3. Press . The error menu last error will appear.
• none. There are no errors present.
• no eth. cable. No Ethernet cable is plugged in.
• no Internet. There is no Internet connection available.
• connect.error. There is a connection error to the server.