To Next PageTo Next Page
Need help?Do you have a question about the Fortin FTX94 and is the answer not in the manual?
General| Firmware | Upgradable |
|---|---|
| Installation | Professional installation recommended |
| Type | Security System |
| Compatibility | Universal |
| Functionality | Alarm, Keyless Entry |
Key duties of the remote car starter operator for safe usage.
Information regarding radio interference and compliance for Canadian users.
FCC and Industry Canada compliance details for radio frequency energy.
Details on LOCK, UNLOCK, START, TRUNK, STOP, and AUXILIARY button operations.
Understanding the meaning of remote control LED flashes for feedback.
Step-by-step instructions for remote starting automatic and manual vehicles.
Tips for pre-setting vehicle climate controls for optimal remote start comfort.
Essential safety procedure for remote starting manual transmission vehicles.
Default method to activate remote start sequence using the remote.
Installer-programmed method for automatic remote start activation when leaving the vehicle.
Steps to safely take control of the vehicle after it has been remotely started.
Instructions on how to stop the remote start function.
Enables vehicle to run without key for short errands, automatic transmission.
Enables vehicle to run without key for short errands, manual transmission.
Procedure for cooling down a turbo-charger after vehicle shutdown.
Disables remote starter and alarm for service or parking indoors.
Enabling/disabling Valet Mode using the remote transmitter.
Automatic remote start activation based on low temperatures.
Controlling additional vehicle features via auxiliary outputs on the remote.
Functions for locking and unlocking vehicle doors using the remote.
Details on locking and unlocking vehicle doors with the remote.
Configuration for automatic or manual arming of the alarm system.
Automatic door locking/unlocking based on ignition and brake pedal status.
Re-arming the OEM anti-theft system after remote start shutdown.
Configuring audible feedback (horn/siren) for remote signals.
Understanding alarm sounds and notifications for security events.
Automatic disabling of zones that trigger excessive false alarms.
Operation and sensitivity of the shock sensor for impact detection.
Activating horn and lights to locate the vehicle or trigger panic.
Disabling specific sensors like shock or auxiliary inputs.
Environmental and physical factors that influence remote control range.
Common causes and solutions for remote start failures.
Interpreting parking light flashes for remote starter status before starting.
Interpreting parking light flashes for alarm status after disarming.
