Planning AP Location22
After configuring the above parameters click the Apply button to save the configuration.
Viewing Sitesurvey Results
Sitesurvey results can be viewed from CLI and using the GUI.
Parameters Description
SSID Radio 0
SSID Radio 1
Enter a value that you will be broadcast for connecting your Wi-Fi client. The
default values are Fortinet_Site_Survey_2.4 for Radio 0 and Fortinet_Site_-
Survey_5 for Radio 1.
Country Select a country from this list. This selection automatically sets the first valid
channel for each radio. However, you can choose to override them by
selecting a different channel number.
Radio 2.4 Ghz
Radio 5 Ghz
Select ON or OFF to enable or disable a radio.
Tx Power
Radio 0
Tx Power
Radio 1
Enter transmit power for each of the radios. Maximum value for Radio 0 (2.4
Ghz) and maximum value for Radio 1 (5 Ghz) is dependent on the selected
country and the channel.
2.4 Ghz Chan-
nels
5 Ghz Chan-
nels
Select a valid channel. By default this is automatically set to the first valid
channel for the selected country.
Publish SSID
Radio 0
Publish SSID
Radio 1
Select ON or OFF to broadcast SSID.
Stats Refresh
Rate
Enter the time interval (in milliseconds) to collect and send (display) sitesur-
vey results.
Inactivity time-
out period
Enter the time interval (in seconds) for the AP to wait for client to connect.
After the inactivity time period, the AP will reboot to normal AP mode.
To Next Page
Loading...
