Antennae
The FortiAP 222E unit provides dual
concurrent radio signals. Use the
top antenna mounts to access the
Radio 1 (802.11 b/g/n at 300Mbps)
signals, and the bottom antenna
mounts (near the waterproof PoE
connector) to access the Radio 2
(802.11 a/n/ac at 867Mbps) signals.
To use both radio frequencies
concurrently, use all four WiFi
antennae.
To install the WiFi antennae
1.
Insert the antennae base firmly
into the appropriate antenna
mount.
2.
Securely hand tighten the
fastening collar.
3.
Repeat for the remaining
antennae.
11
To Next Page
Loading...
