Fortinet FortiAP 231FL - Setup Options; FortiAP Cloud Setup; Direct Connection Setup

10 11
1
2
1
3
4
5
6
7
Interfaces - FAP 231FL
System Status LED Indicators
Scanning
Off: Scanning disabled
Amber: Scanning enabled

Off: Radio 1 & 2 are off
Blue: Radio 1 is on
Blinking Blue: Radio 1 is transmitting data
Amber: Radio 2 is on
Blinking Amber: Radio 2 is transmitting data
Green: Radio 1 & 2 are on
Blinking Green: Radio 1 & 2 are transmitting data

Off: Link is off
Green: Link is on
Blinking Green: Transmitting at 1Gbps
Blinking Amber: Transmitting at 100Mbps

Off: Link is off
Green: Link is on
Blinking Green: Transmitting at 1Gbps
Blinking Amber: Transmitting at 100Mbps

Off: Device is off
Green: Device is on
Blinking Green: Booting up
Amber: Reserved for customizations
2
2
2
2
1
1
1
1
CONSOLE (RJ-45) CLI management computer interface
LAN1/POE GE (RJ-45) 1 Gbps 802.3at PoE Ethernet interface
USB 3.0 (Type A) software enabled power through the GPIO, 9A/5V
LAN2 GE (RJ-45) 1 Gbps Ethernet interface
RESET resets the device
OPTIONAL POWER (12V DC) Optional 12V DC 2.5A adapter
2 3 4
5
6 7