Connect the FortiAP device to a FortiGate controller or
an Internet connection.
Ensure that the Power over Ethernet (PoE) cable is
connected to an applicable port on your FortiGate
device or PoE injector.
Caution: Adequate grounding must be provided
to the FortiAP unit and the PoE injector, in
compliance with your local electrical code or
regulations.
Warning: This device complies with IEEE 802.3af
PoE specification. Do not use any PoE injectors
that are not IEEE 802.3af compliant as they may
damage your device.
To Next Page
Loading...
