Off: No PSE output
On: PSE output (max 4W)
Flashing: PSE load over limit
4: PSE LED
Reset button
Off: Not connected
On: Connected
Flashing: Activity
1,2, and 3:
LAN1/2/3 LED
FAP-C24JE
Off: No power
On: Normal
Flashing: Boot up
SYS LED
Off: Not connected
On: Connected
Flashing: Activity
WAN LED
WiFi LED
Off: Radio disabled or off
Green: Radio is enabled
Flashing Green: Wireless activity
Press and hold for less than 10
seconds: Reboot
Press and hold for 10 seconds or
longer: Reset to factory default
1 432
Notes - PSE max output is 4W if FAP-C24JE is powered by 802.3af (15.4W)
- PSE max output is 802.3af (15.2W) if it is powered by 802.3at (25.5W)
- PoE out is only available if power source is PoE
To Next Page
Loading...
