7
5 - Bluetooth, Zigbee and Radio 3
No light: Radio 3, BLE, and Zigbee are powered o
Green: Radio 3, BLE, and Zigbee are enabled
Blinking Green: Data Tx/Rx on Radio 3, BLE, and Zigbee
Orange: Radio 3 is up. Blinking Orange: Data Tx/Rx on Radio 3
Blue: BLE is enabled Blinking Blue: Data Tx/Rx on BLE
Red: Zigbee is enabled Blinking Red: Data Tx/Rx on Zigbee
4 - WiFi (Radio 1 and 2)
No light: Radio 1 and 2 are powered O
Blue: Radio 1 is up. Blinking Blue: Data Tx/Rx on Radio 1.
Orange: Radio 2 is up. Blinking Orange : Data Tx/Rx on Radio 2.
Green: Both Radio 1 and 2 are up. Blinking Green: Data Tx/Rx on both Radio 1 and 2.
1 - Power
Steady Green: Power On
Blinking Green: Booting Up or Upgrading Firmware.
Orange: Wireless controller found and the device is not managed.
No light: Power O/Wireless controller not found
2 - LAN1 and LAN 2
No light: Link Down
Green: Link up
Blinking Green: Data Tx/Rx at 1Gbps
Blinking Orange: Data Tx/Rx at 100Mbps
To Next Page
Loading...
