EasyManua.ls Logo

Fortinet FortiAP U431F - LED Status Descriptions

Fortinet FortiAP U431F
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
5 - Bluetooth and Radio 3 scanning
No light: Radio 3 is powered o.
Green: Radio 3 and BLE scanning enabled. Blinking Green: Data Tx/Rx on Radio 3 and BLE .
Orange: Radio 3 is up. Blinking Orange: Data Tx/Rx on Radio 3.
Blue: BLE scanning enabled Blinking Blue: Data Tx/Rx on BLE.
4 - WiFi (Radio 1 and 2)
No light: Radio 1 and 2 are powered O
Blue: Radio 1 is up.
Blinking Blue: Data Tx/Rx on Radio 1.
Orange: Radio 2 is up.
Blinking Orange : Data Tx/Rx on Radio 2.
Green: Both Radio 1 and 2 are up.
Blinking Green: Data Tx/Rx on both Radio 1 and 2.
1 - Power
Steady Green: Power On
Blinking Green: Booting Up or Upgrading Firmware.
Orange: Wireless controller found and the device is not managed.
No light: Power O/Wireless controller not found
2 - LAN1 2.5Gbps 3 - LAN2 1Gbps
No light: Link Down No light: Link Down
Green: Link up. Green: Link up.
Blinking Green: Data Tx/Rx at 2.5Gbps. Blinking Green: Data Tx/Rx at 1Gps.
Blinking Orange: Data Tx/Rx at 100Mbps/1Gbps. Blinking Orange: Data Tx/Rx at 100Mbps.

Related product manuals