Antennas (Applicable for FAP-U433F only)
The FortiAP unit is a tri-radio, dual band access point. Use the 2.4/5.0 GHz antennas to access the 2.4GHz
and 5GHz radio signals and the 5.0 GHz antennas to access the 5GHz radio signals. To use all three radios
concurrently, all ten WiFi antennas are required
Installing the WiFi Antennas
1. Insert the antenna base rmly into the appropriate antenna mount.
2. Securely hand tighten the fastening collar.
3. Repeat for the remaining antennas.
6
To Next Page
Loading...
