Fortinet FortiExtender 101F - Ports and LED Indicators; Console and Power Interface; Network Ports and Status LEDs; Reset and Default Button

6 7
Ports & LED
SIM Card Bay
Reset/Default Button
LAN (1–4) Ports & LEDs
Port 4 is PoE PD LAN (802.3af/at)
USB 2.0 Port
Console Port
Note: To access the device from
its console port, you must set
the baud rate to 115200.
WAN Port & LED
12VDC/2A Input (optional)
(Use 12VDC/2A power adapter with ID 2.1 mm plug.)
LED Behavior and Description
WAN Port LED • Green Steady: 1-Gb network connected.
• Green Flashing: 1-Gb network activity.
• Amber Steady: 100-Mb network connected.
• Amber Flashing: 100-Mb network activity.
• O: No network connection.
LAN Port LEDs • Green Steady: 1-Gb network connected.
• Green Flashing: 1-Gb network activity.
• Amber Steady: 100-Mb network connected.
• Amber Flashing: 100-Mb network activity.
• O: No network connection.
SIM Card Bay & Reset/Default Button
Button Operating Instructions
Reset/Default Button • Press and hold for less than 5 seconds: Reset/Reboot the
device.
• Press and hold for more than 5 seconds: Restore the
device to its factory default settings.