Fortinet FortiFone FON-C71 - Configuration Overview; Status; Features; Auto Redial

Configuration Overview Page 9 FortiFone User Guide
Configuration Overview
The phone supports the access and configuration of many parameters directly from the
Telephone User Interface. To access the Configuration menu, tap the Menu softkey while the
phone is not in use.
The Configuration menu consists of several sub-menus as listed below:
• Status
• Features
• Settings
• Messages
• History
• Directory
• USB Recording
Status
The Status page includes the IP address, MAC address and firmware of the phone. It also
provides more details about the phone, the network connections and the registration status.
Features
The following features of the FON-C71 are used to enable a redial state, change History settings
and to run certain diagnostics for troubleshooting.
Auto redial
You can enable auto redial to automatically redial a phone number when the called party is
busy. You can also configure the number of auto redial attempts and the time to wait between
redial attempts.
To configure auto redial via phone user interface:
1. Tap Menu > Features > Auto Redial.
2. Tap the or softkey to select Enable from the Auto Redial field.
3. Enter the desired time (in seconds) in the Redial Interval field.
The default time interval is 10 seconds.
4. Enter the desired number of redial attempts in the Redial Times field. The default value is 10.
5. Tap the Save softkey to accept the change or the Back softkey to cancel.