Fortinet fortigate 90d - Web Browser Setup; Terminal Emulation with Console Cable

10 11
C
Terminal Emulation with Console Cable
To Connect to the CLI (Console Models Only)
1. Connect the FortiGate unit console port to the management computer using a standard
console cable (not provided).
2. Start a terminal emulation program on the management computer.
Use the following settings:
Baud Rate: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
3. Press Enter on your keyboard to connect to the CLI.
4. Login using username “admin” and no password. You can now proceed with
DPOmHVSJOHZPVS'PSUJ(BUFVOJU
A list of commands can be found at http://forti.net/cli.
Get started by typing “?” for a list of available commands.
Begin typing a command and type “?” for a list of available ways to complete.
For example iDPOmH wXJMMTIPXUIFMPXFTUMFWFMPGDPOmHVSBUJPOPQUJPOT
A comprehensive reference guide with all commands can be found at http://forti.net/cli.