372 01-28006-0007-20041105 Fortinet Inc.
CLI configuration Log & Report
Example
This example shows how to enable logging to a remote syslog server, configure an IP
address and port for the server, and set the facility type to user.
config log syslogd setting
set status enable
set server 220.210.200.190
set port 601
set facility user
end
This example shows how to display the log setting for logging to a remote syslog
server.
get log syslogd setting
This example shows how to display the configuration for logging to a remote syslog
server.
show log syslogd setting
If the show command returns you to the prompt, the settings are at default.
To Next Page
Loading...
