Fortinet FortiGate FortiGate-500 - Factory Default Transparent Mode Network Configuration; Factory Default Firewall Configuration

Getting started Factory default FortiGate configuration settings
FortiGate-500 Installation Guide 01-28004-0023-20040830 19
Factory default Transparent mode network configuration
In Transparent mode, the FortiGate unit has the default network configuration listed in
Table 3 .
Factory default firewall configuration
FortiGate firewall policies control how all traffic is processed by the FortiGate unit.
Until firewall policies are added, no traffic can be accepted by or pass through the
FortiGate unit. To allow traffic through the FortiGate unit you can add firewall policies.
See the FortiGate Administration Guide for information about adding firewall policies.
The following firewall configuration settings are included in the default firewall
configuration to make it easier to add firewall policies.
Table 3: Factory default Transparent mode network configuration
Administrator
account
User name: admin
Password: (none)
Management IP
IP: 10.10.10.1
Netmask: 255.255.255.0
DNS
Primary DNS Server: 207.194.200.1
Secondary DNS Server: 207.194.200.129
Administrative access
Internal HTTPS, Ping
External Ping
DMZ HTTPS, Ping
Port 1 Ping
Port 2 Ping
Port 3 Ping
Port 4 Ping
Port 5 Ping
Port 6 Ping
Port 7 Ping
Port 8 Ping