Fortinet FortiMail 3.0 MR4 - Ip_Policy Match (Transparent Mode); Syntax; History; Related Topics

set ip_policy match (transparent mode)
FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
06-30004-0420-20080814 167
ip_policy match (transparent mode)
Use this command to set the client and server IP addresses. The IP policy applies to traffic exchanged
when the client connected to the server.
In the context of this command, the client is the system initiating the connection and the server is the
system receiving the connection attempt.
Syntax
set ip_policy <policy_integer> match <client_ipv4/mask>
<server_ipv4/mask>
History
Related topics
• set ip_policy match (gateway and server modes)
Keywords and variables Description Default
<policy_int> Enter the IP policy number.
<client_ipv4/mask> Enter the IP address and CIDR subnet of the client. The address
0.0.0.0/0 will include all addresses.
0.0.0.0/0
<server_ipv4/mask> Enter the IP address and CIDR subnet of the server. The address
0.0.0.0/0 will include all addresses.
0.0.0.0/0
FortiMail v3.0 New.