Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 439

- 439 -
Command Mode
Privileged Exec
User Exec
Display Messages
Router: Total number of router LSAs in the OSPF link state database.
Network: Total number of network LSAs in the OSPF link state database.
Summary Net: Total number of summary network LSAs in the database.
Summary ASBR: Number of summary ASBR LSAs in the database.
Type-7 Ext: Total number of Type-7 external LSAs in the database.
Self-Originated Type-7: Total number of self originated AS external LSAs in the OSPFv3 link state
database.
Opaque Link: Number of opaque link LSAs in the database.
Opaque Area: Number of opaque area LSAs in the database.
Subtotal: Number of entries for the identified area.
Opaque AS: Number of opaque AS LSAs in the database.
Total: Number of entries for all areas.
8.3.1.7 show ip ospf interface
This command displays the information for the IFO object or virtual interface tables.
Syntax
show ip ospf interface {<slot/port> | loopback <loopback-id>}
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
IP Address: The IP address for the specified interface.
Subnet Mask: A mask of the network and host portion of the IP address for the OSPF interface.
Secondary IP Address(es): The secondary IP addresses if any are configured on the interface.
OSPF Admin Mode: States whether OSPF is enabled or disabled on a router interface.
OSPF Area ID: The OSPF Area ID for the specified interface.
OSPF Network Type: The type of network on this interface that the OSPF is running on.
Router Priority: A number representing the OSPF Priority for the specified interface.