Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 50

- 50 -
all - This command represents all interfaces.
no - This command will be back to 10G speed from 1G speed for all ports.
Default Setting
None
Command Mode
Global Config
7.2.1.6 negotiate
This command enables automatic negotiation on a port. The default value is enabled.
i
The 10-Giga interfaces will not provide the following command.
Syntax
negotiate
no negotiate
no - This command disables automatic negotiation on a port.
Default Setting
Enable
Command Mode
Interface Config
This command enables automatic negotiation on all interfaces. The default value is enabled.
Syntax
negotiate all
no negotiate all
all - This command represents all interfaces.
no - This command disables automatic negotiation on all interfaces.
Default Setting
Enable