- 508 -
Command Mode
Privileged Exec
Display Message
The following fields are displayed as a table when <slot/port> is specified.
Group Address: The address of the multicast group.
Interface: Interface through which the multicast group is reachable.
Up Time: Time elapsed in hours, minutes, and seconds since the multicast group has been known.
Expiry Time: Time left in hours, minutes, and seconds before the entry is removed from the MLD
membership table.
When <group-address> is specified, the following fields are displayed for each multicast group and
each interface.
Interface: Interface through which the multicast group is reachable.
Group Address: The address of the multicast group.
Last Reporter: The IP Address of the source of the last membership report received for this
multicast group address on that interface.
Filter Mode: The filter mode of the multicast group on this interface. The values it can take are
include and exclude.
Version 1 Host Timer: The time remaining until the router assumes there are no longer any MLD
version-1 Hosts on the specified interface.
Group Compat Mode: The compatibility mode of the multicast group on this interface. The values it
can take are MLDv1 and MLDv2
9.3.1.2 show ipv6 mld interface [<slot/port>]
Use this command to display MLD-related information for the interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
The following information is displayed for each of the interfaces or for only the specified interface.
Interface: The interface number in unit/slot/port format.
MLD Mode: Displays the configured administrative status of MLD.
Operational Mode: The operational status of MLD on the interface.
To Next Page
Loading...
