Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 588

- 588 -
10.4.2.20 area stub
This command creates a stub area for the specified area ID. A stub area is characterized by the fact that
AS External LSAs are not propagated into the area. Removing AS External LSAs and Summary LSAs
can significantly reduce the link state database of routers within the stub area.
Syntax
area <areaid> stub
no area <areaid> stub
<areaid> - Area ID.
<no> - This command deletes a stub area for the specified area ID.
Default Setting
None
Command Mode
Router OSPFv3 Config
10.4.2.21 area stub no-summary
This command disables the import of Summary LSAs for the stub area identified by <areaid>.
Syntax
area <areaid> stub no-summary
no area <areaid> stub no-summary
<areaid> - Area ID.
no - This command sets the Summary LSA import mode to the default for the stub area identified by
<areaid>.
Default Setting
Enabled
Command Mode
Router OSPFv3 Config