- 706 -
Selection Criteria
ARP ACL Name - Select the ARP ACL for which information want to be displayed or configured.
Configurable Data
Sender IP Address - This is used to create new Rule for the Selected ARP ACL. This indicates
Sender IP address match value for the ARP ACL.
Sender MAC Address - This is used to create new Rule for the Selected ARP ACL. This indicates
Sender MAC address match value for the ARP ACL.
Remove - This is used to select the particular ACL Rules which you want to delete.
Command Buttons
Add - This is used to add new ACL Rule.
Submit - This is used to delete the entries selected using checkbox under Remove field.
Refresh - Refresh the data on the screen with the present state of the data in the switch.
11.3.3.6 Configuring DAI Statistics Page
Selection Criteria
VLAN ID - Select the DAI enabled VLAN ID for which statistics to be displayed.
Non-Configurable Data
DHCP Drops - Number of ARP packets that were dropped by DAI as there is no matching DHCP
Snooping binding entry found.
ACL Drops - Number of ARP packets that were dropped by DAI as there is no matching ARP ACL
rule found for this VLAN and the static flag is set on this VLAN.
To Next Page
Loading...
