Fortinet Technologies Inc. Page 109 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Figure 32: Auto-provisioning settings
GUI field Description
Auto Provisioning
Setting
Enabled Select to activate the SIP phone auto-provisioning function for auto
discovering the phones.
Generate default
configuration for
unassigned phone
Select to generate phone configuration files for the supported
unassigned SIP phones. For details, see “Viewing unassigned
phones” on page 27.
With this option selected, once a supported SIP phone connects to
the FortiVoice unit and is auto-discovered, the FortiVoice unit
assigns an IP address to the phone and sends the basic PBX setup
information to it.
If you want to upgrade your phone system and keep the current
phone configuration, do not select this option. Otherwise your
existing phone configuration will be overridden by the upgraded
FortiVoice configuration.
PIN for phone
configuration
Enter a password to be used by a FortiFone that connects to the
FortiVoice unit to set mobile extension number.
For example, you can press the default Configure Phone feature
code *17 (See “Modifying feature access codes” on page 237) on
any FortiFone that connects to the FortiVoice unit and enter this
password. You can then enter an existing extension to set it as the
extension of this phone.
Server Settings for
Phone Configuration
To Next Page
Loading...
