Fortinet FortiVoice - Page 124

Fortinet Technologies Inc. Page 124 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Figure 36: Configuring an LDAP profile
GUI field Description
Profile name For a new profile, enter its name.
Server name/IP Enter the fully qualified domain name (FQDN) or IP address of the
LDAP server.
Port: Enter the port number where the LDAP server listens.
The default port number varies by your selection in Use secure
connection: port 389 is typically used for non-secure connections,
and port 636 is typically used for SSL-secured (LDAPS) connections.
Fallback server
name/IP
Optional. Enter the fully qualified domain name (FQDN) or IP address
of an alternate LDAP server that the FortiVoice unit can query if the
primary LDAP server is unreachable.
Port: Enter the port number where the fallback LDAP server listens.
The default port number varies by your selection in Use secure
connection: port 389 is typically used for non-secure connections,
and port 636 is typically used for SSL-secured (LDAPS) connections.