Fortinet Technologies Inc. Page 151 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
GUI field Description
Voicemail Setting
User ID This is the system-generated ID based on the extension
number. This is not editable. You can add a new user ID
through the CLI. For more information, see the FortiVoice CLI
Reference.
Number The extension number. This is not editable.
Display name Enter the name displaying on the extension. This is usually
the name of the extension user.
Emergency caller ID Enter the caller ID to display on the destination phone when
you dial the emergency number, such as 911.
If you also enter an external caller ID (see “External caller ID”
on page 151), that ID will not override the 911 caller ID when
dialing the 911 emergency number.
External caller ID The caller ID you want to display on a called phone instead of
the FortiVoice main number (see “Main number” on page 99)
or the trunk phone number (see “Phone Number” on
page 172). This is not editable.
For details, see “External caller ID” on page 133 and
“External caller ID” on page 141.
Ring duration Enter the phone ringing duration in seconds before an
incoming call goes to voicemail.
Call forward Select to forward phone calls and enter the phone number to
forward the calls. This function only works if call forwarding is
enabled in the extension’s user privilege. See “Configuring
user privileges” on page 210.
Call waiting Select to enable call waiting. This function only works if call
waiting is enabled in the extension’s user privilege. See
“Configuring user privileges” on page 210.
Do not disturb Select to enable DND. This function only works if DND is
enabled in the extension’s user privilege. See “Configuring
user privileges” on page 210.
Message waiting
indication
Select to enable phone indication that a message is received.
Voicemail handling
(Caller press 0
during
announcement)
Select to enable reaching the operator by pressing 0 when
you hear the announcement of a callee’s voicemail.
Notification Options