Fortinet Technologies Inc. Page 177 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Figure 61: Adding an analog CO trunk
GUI field Description
Analog Setting
Name The name of this trunk. This is view only.
Display name Enter your caller ID that will appear on the called phone,
such as Example Company.
Number Enter the phone number that will appear on the called
phone.
If you entered the external caller ID in “External caller ID” on
page 133 or “External caller ID” on page 151, this trunk
phone number will be overridden by the external caller ID.
Enabled Select to activate the trunk.
Hardware Property
analog1 Use this option to configure the analog trunk.
Click Edit to configure the PSTN analog settings to match
the same settings of your PSTN service provider. Click OK
after finishing the configuration. For more information, see
“Configuring the analog voice trunk” on page 182.
Port Select the FXO ports you want for this trunk and click -> to
move them into the Selected ports field. Each FXO port
provides an analog phone line for a FXO device, such as a
phone or fax.
To Next Page
Loading...
