Fortinet FortiVoice - Page 187

Fortinet Technologies Inc. Page 187 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
To set up an inbound dial plan
1. Go to Call Routing > Inbound > Inbound.
2. Click New.
3. Configure the following:
Figure 67: Inbound dial plan
GUI field Description
Name Enter a name for this plan.
Enabled Select to activate this dial plan.
From Trunk Select the trunks of the incoming calls that are subject to this dial
plan.
Select the trunks in the Available field and click -> to move them
into the Selected field.
Dialed Number Match With dialed number pattern matching, you can create one phone
number pattern in your dial plan that matches many different
numbers.
The called numbers matching this pattern will follow this dial plan
rule.
Create the number match following “Pattern-matching syntax” on
page 196 and “Pattern-matching examples” on page 196.