Fortinet Technologies Inc. Page 188 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Caller ID Match Click New to set the caller ID pattern following “Pattern-matching
syntax” on page 196 and “Pattern-matching examples” on
page 196 for this dial plan, and click Create.
You can enter an incoming call’s display name string or the caller’s
phone number string as the pattern.
Caller IDs under this pattern are subject to this plan.
Caller ID modification Select the caller ID modification configuration. Click Edit to modify
the selected configuration or click New to configure a new one. For
more information on caller ID modification, see “Modifying caller
IDs” on page 117.
Call Handling Select the actions to process the incoming calls with matched
dialed numbers and/or caller IDs.
Action type Select the type of action for the plan and configure the actions
accordingly. See “Action” on page 189.
• Endpoint action: Select if you want to send incoming calls to
the local destinations according to operation schedules. For
example, send calls to the voicemail after business hours.
• Dial local number: Select if you want to send incoming calls to
the local destinations at any time. For example, you can enter
222xxxx as a pattern and strip 222. The FortiVoice unit will only
dial the last four digits for all called numbers matching the
pattern.
• Call routing: Select if you want to route incoming calls (to the
FortiVoice unit) to an external phone system using an outbound
dial plan.
To Next Page
Loading...
