Fortinet Technologies Inc. Page 212 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Early media Early media is the exchange of information between the PBXes
before the establishment of a phone connection, such as the
ring tone. You can select a music file for early media. For
details, see “Managing sound files and music on hold” on
page 113.
Fax Set the user rules for faxing. For information on fax, see
“Configuring fax” on page 227.
Enabled Select to set the fax rules for users.
Max incoming
messages
Enter the number of incoming faxes allowed.
Max incoming fax
retention days
Enter the number of days to keep the incoming faxes.
Max outgoing
messages
Enter the number of outgoing faxes allowed.
Max outgoing fax
retention days
Enter the number of days to keep the outgoing faxes.
Call Restriction
Allow long distance
call
Select to allow long-distance direct dialing. If required, select
the account code that needs to be dialed before making a
long-distance call. For information on account code, see
“Configuring account codes” on page 215.
Allow international
call
Select to allow international direct dialing. If required, select
the account code that needs to be dialed before making a long
distance call. For information on account code, see
“Configuring account codes” on page 215.
There are phone numbers with certain calling services and
likely higher calling rates such as 900 number in North America
and 0990-5 number in Japan. These numbers do not belong to
international calls or long-distance calls and can be banned on
a system-wide basis (see “Configuring PBX options” on
page 99). However, if you want to allow calling to some of
these numbers, click New and configure the following:
1. Enter a name for this setting.
2. Select Enabled to activate this exemption.
3. Enter the area code/prefix of the number to be called, such
as 900.
4. Select the account/exempt code that needs to be dialed
before making a call with this prefix. For information on
account code, see “Configuring account codes” on
page 215.
5. Click Create.