Fortinet Technologies Inc. Page 246 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
2. Click New to create a new entry or double-click an existing entry to modify it.
A dialog appears.
Figure 91: Remote host configuration dialog
Profile Name Displays the remote host name.
Server Displays the IP of the Syslog server or FortiAnalyzer unit.
Port Displays the port on the Syslog server or FortiAnalyzer unit.
Level Displays the minimum severity level for logging purposes.
Facility Displays the facility identifier the FortiVoice unit uses to identify itself.
GUI field Description
Log to Remote Host
Enable Select to allow logging to a remote host.
Name Enter a name for the remote host.
IP Enter the IP address of the Syslog server or FortiAnalyzer unit
where the FortiVoice unit will store the logs.
Level Select the severity level that a log message must equal or exceed
in order to be recorded to this storage location.
For information about severity levels, see “Log message severity
levels” on page 242.
Port If the remote host is a FortiAnalyzer unit, enter 514; if the remote
host is a Syslog server, enter the UDP port number on which the
Syslog server listens for connections (by default, UDP 514).
To Next Page
Loading...
