Fortinet Technologies Inc. Page 253 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Configuring Station Messaging Detail Record (SMDR)
FortiVoice SMDR component provides FortiVoice call detail records to third party devices on
certain communication and format protocols based on third party's device requirements. For
example, Property Management System (PMS) uses the FortiVoice SMDR to manage hotel
guest call charges.
Configuring FortiVoice SMDR requires advanced SMDR knowledge and should be performed
by advanced administrative users and field engineers.
This section contains the following topics:
• Configuring SMDR settings
• Setting SMDR formats
Configuring SMDR settings
Configure SMDR settings to enable the FortiVoice communications with third party devices.
To configure SMDR settings
1. Go to Log & Report > SMDR Settings > SMDR.
2. Select Enabled to activate the FortiVoice SMDR function.
3. Select a format protocol for the FortiVoice communications with the third party devices.
For information on format, see “Setting SMDR formats” on page 253.
4. For Port, enter the port number that connects to the third party devices.
5. For Max clients, enter the number of third party devices to which the FortiVoice unit provides
SMDR. The range is 1-10.
6. For Trusted hosts, enter the IP address and netmask of the third party device.
If you have multiple third party devices, you may enter up to 10 trusted hosts.
7. Click OK.
Setting SMDR formats
To communicate with third party devices, the FortiVoice SMDR format needs to be defined
based on the device requirements so that the devices can recognize the FortiVoice SMDR.
The FortiVoice unit provides example XML SMDR format files. You can modify the files to meet
with your needs. The following is an example format file:
To Next Page
Loading...
