Fortinet Technologies Inc. Page 84 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Table 12:System session MIB fields
Configuring email settings
You can configure the FortiVoice unit to send email notifications to phone users when they miss
a phone call or receive a voicemail or fax.
To configure email settings
1. Go to System > Configuration > Mail Settings.
2. Configure the following:
MIB field Description
fvSysModel FortiVoice model number, such as 400 for the FortiVoice-400.
fvSysSerial FortiVoice unit serial number.
fvSysVersion The firmware version currently running on the FortiVoice unit.
fvSysCpuUsage The current CPU usage (%).
fvSysMemUsage The current memory utilization (%).
fvSysLogDiskUsage The log disk usage (%).
fvSysStorageDiskUsa
ge
The storage disk usage (%).
fvSysEventCode System component events.
fvSysload Current system load.
fvSysHA • fvHAMode: Configured HA operating mode.
• fvHAEffectiveMoce: Effective HA operating mode.
fmlHAEventId HA event type ID.
fmlHAUnitIp Unit IP address where the event occurs.
fmlHAEventReason The reason for the HA event.
For phone users to receive the notifications, you need to add their email addresses when
configuring the extensions. See “Configuring Extensions” on page 130.
To Next Page
Loading...
