Fortress Automotive Security FS-52 User Manual

FS-42 and FS-52 Combo Alarm System
INSTALLATION HANDBOOK:
INTRODUCTION
Congratulations on your choice of a Crimestopper combination alarm & remote engine starter with Data Port
Technology
This installation book is designed for the installer or individual with an existing understanding of
automotive electrical systems, along with the ability to test and connect wires for proper operation. To ease
installation, we suggest that you READ THIS MANUAL before beginning your installation. This book is
provided as a GENERAL GUIDELINE and the information contained herein may differ from your vehicle.
DISCLAIMER:
Crimestopper Security Products, Inc. and its vendors shall not be liable for any accident resulting from the
use of this product. This system is designed to be professionally installed into a vehicle in which all
systems and associated components are in perfect working condition.
TECHNICAL SUPPORT (800)-998-6880
Monday - Friday 8:00am - 4:30pm Pacific Time
Website: www.crimestopper.com
CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET
SIMI VALLEY, CA. 93063
REV 09.2012
This device complies with FCC Rules part 15. Operation is
subject to the following two conditions: 1) This device may not
cause interference, and (2) this device must accept any
interference that may be received, including interference that
may cause undesired operation. The manufacturer is not
responsible for any radio or TV interference caused by
unauthorized modification to this equipment. Such
modification could void the user's authority to operate the
equipment.

Fortress Automotive Security FS-52 Specifications

General

Brand	Fortress Automotive Security
Model	FS-52
Category	Car Alarm
Language	English

Summary

CAUTIONS & WARNINGS

General Installation Safety Warnings

Critical safety precautions to prevent damage or injury during installation.

WIRING: 12-PIN CONNECTOR

Chassis Ground Connection

Parking Light Output Connection

Input Source Connection

WIRING: 12-PIN CONNECTOR CONT.

Siren Output Connection

Remote Auxiliary Output Connection

Starter Disable/Anti-Grind Output Connection

Horn Honk Output Connection

Passenger Door Unlock Output Connection

Dome Light Output Connection

OEM Alarm Outputs

Tachometer Input Connection

WIRING: 7-PIN CONNECTOR (TRIGGER INPUTS)

Hood Trigger Input Connection

Trunk Pin Switch Input Connection

Door Pin Switch Input Connections

Start Activation / Hand Brake Input

Brake Reset Input Connection

WIRING: 7-PIN CONNECTOR CONT.

WIRING 4-PIN OUTPUT CONNECTOR

WIRING: 4-PIN SHOCK SENSOR

POWER DOOR LOCKS: WIRING & SYSTEM TYPES

Door Lock Wire Functions

Description of blue, red, and green wire functions for door locks.

Determining Door Lock Type

Steps to identify the vehicle's specific door lock system type.

Door Lock System Types Overview

Explanation of Negative, Positive, Reverse Polarity, and Data Bus systems.

DOOR LOCK WIRING

Negative Trigger Door Lock Wiring

Positive Trigger Door Lock Wiring

Reverse Polarity Door Lock Wiring

Aftermarket Motor/Door Lock Wiring

SEPARATE DRIVER'S DOOR UNLOCK WIRING

Negative Trigger Door Locks Wiring

Reverse Polarity Door Locks Wiring

TACHLESS MODE

Important Notes on Tachless Mode

Key information and troubleshooting for Tachless mode operation.

Tachless Adjustment Procedure

Step-by-step guide to adjust Tachless mode sensitivity.

TACH MODE PROGRAMMING

Engine Monitoring Methods

Overview of Tach Reference, Tachless, and Hybrid monitoring methods.

Tach Reference Mode Description

Explanation of using the Tach Reference mode for engine sensing.

Tach Programming Steps

Procedure for programming the Tach Reference mode.

TACH FINDER & USEFUL TIPS

Tach Finder Mode Operation

Tach Finder Steps

Cold Weather / High Idle Simulation Tip

PROGRAMMABLE OPTIONS

Option #1-8 Descriptions

Detailed descriptions for programmable options 1 through 8.

Option #9-16 Descriptions

Detailed descriptions for programmable options 9 through 16.

Option #17-26 Descriptions

Detailed descriptions for programmable options 17 through 26.

Option #1-Engine Monitoring Explanation

In-depth explanation of engine monitoring options.

Engine Monitoring Options

Configuration of engine monitoring methods: Tach, Tachless, Hybrid.

Pink/White Wire Selection

Configuring the function of the Pink/White wire.

Passive Arming Configuration

Setting up the passive arming feature for the alarm.

Active Rearm / Auto Rearm Configuration

Configuring automatic re-arming behavior of the alarm.

OEM Remote Arm/Disarm/Start

Enabling control of the system via the OEM remote.

Parking Lights on with Disarm

Configuring parking lights to illuminate upon disarming.

Data Port Protocol Configuration

Selecting the correct data port protocol for bypass modules.

Remote Start & Trunk Pop Button Press

Customizing button presses for remote start and trunk release.

Chirps with Remote Start Activation

Setting siren or horn chirps for remote start confirmation.

Disarm with Trunk Pop

Configuring whether trunk pop also disarms the system.

Open Door Warning Configuration

Setting delay time for door open warnings.

Door Locks Configuration

Adjusting door lock pulse times and functions.

Auto Lock/Unlock with Ignition

Enabling automatic door locking/unlocking with ignition status.

Lock with Remote Start Configuration

Configuring door locking behavior during remote start.

Transmission Type Configuration

Selecting between automatic and manual transmission modes.

Unlock Before Remote Start

Disarming OEM alarm before remote start.

Blue/Black Wire Function

Assigning function to the blue/black wire.

Siren Output Configuration

Configuring siren behavior for triggers and arm/disarm.

Horn Honk Output Configuration

Configuring horn behavior for alerts.

Horn Chirp with Lock/Unlock

Horn Pulse Duration

Minimum Starter Crank Time

Diesel Glow Plug Delay Configuration

Remote Start Engine Run Time

Ultra-Smart Tachless Voltage Adjustment

Idle Down Run Time

Aux #3 Function and Time Control

Aux #4 Function and Time Control

Turbo Timer Function

Pink Wire Function (Carjack/Glow Plug)

PROGRAMMABLE OPTION RESET

1-Way or 2-Way System Selection

Smart Phone Baud Rate Setting

Option Reset to Default

REMOTE PROGRAMMING

Transmitter Code Learning

ALARM TRIGGER DIAGNOSTICS

Interpreting Alarm Trigger Codes

REMOTE START DIAGNOSTICS

Interpreting Remote Start Error Codes

MANUAL TRANSMISSION MODE

WIRING: 6-PIN HIGH CURRENT CONNECTOR

High Current Connector Pinout

High Current Wiring Notes

WIRING DIAGRAM

Comprehensive Wiring Overview

DATA PORT DIAGRAM

Data Port Bypass Module Connection

Data Port Protocol Selection