IMPORTANTS A F E T Y INSTRUCTIONS
Warnings: Misuse of vises c a n c a u s e seriousinjury toe y e s , hands a n d or other body parts.
V i s e s mustbe setup a n d used properly. B e f o r e setupa n d use, read, understand a n d
follow a l l instructions outlined below.
A L W A Y S makesurebench
tops a r e properly secured.
Never use a hammer, extension
pipe, or cheater bar on spindle
handle of vise.
A L W A Y S use proper nuts,
bolts a n d lockwashers ina l l
mounting holes, tohold bench
vise down.
NEVER unscrew movable jaw
beyond maximum specified
opening of vise.
A L W A Y S use vise of proper
sizea n d capacity tohold w o r k
object.
NEVER w e l d base of vise toa n y
metal object.
A L W A Y S wear e y e , face, a n d
ear protection w h e n striking or
using power tools with a vise.
NEVER use a vise topress a n
object into or out of another
object.
A L W A Y S wear dust maskor
respirator w h e n working with
wood, metal, chemical dusts
or mists.
NEVER use a n d extension pipe to
tighten handles of lockdowns.
A L W A Y S wear restrictive
hair covering a n d a n t i slip
footwear while operating vise.
NEVER place pressurized
containers or combustible
materials invise.
A L W A Y S hand tighten
handles of lockdowns f o r
swivelbase.
NEVER wear loose clothing or
jewelry while operating vise
A L W A Y S inspect vise f o r
stress fatigue or damage tothe
vise before using.
A L W A Y S maintain thevise –
g r e a s e main screw regularly.
NEVER apply extreme
heat or prolong heat tothevise a s
itmayalter structural properties.
To Next Page
Loading...