EasyManua.ls Logo

Fosa TURTLE - Page 6

Fosa TURTLE
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
START USING YOUR TURTLE
Make sure your TURTLE and the Vacuum Canisters are operated on a flat, dry surface and follow the
instructions as per below STEPS:
REMINDER:
STEP 1.
Place food inside the FOSA Vacuum Canister. Set the FOSA Lid on top and press
firmly until there is no gap between the Airtight Seal Ring and the Vacuum
Canister.
STEP 2.
Place the TURTLE in the middle of the FOSA Lid and the TURTLE is well centered
on top of Release button. Otherwise, no air will be pumped out from Vacuum
Canister.
STEP 3.
Press the “Start” Button once. TURTLE is now pumping air out of Vacuum Canister.
Working: LED will display till vacuuming process is finished.
It will stop automatically and auto pop-up when finished.
Prior to opening the FOSA Lid,
you need to release the vacuum
in the Vacuum Canister; simply
press the Release button in the
middle of FOSA Lid.