Foscam FN3004H Quick Installation Guide

1 2
3
6
5
4
Quick Installation Guide
Network Video Recorder
Model: FN3004H
Colour: Black
Model: FN3004H
Colour: White
Side Panel
Rear Panel
Interface Connection
V1.2
NVR ×1
DC Power Adapter ×1
Quick Installation Guide ×1
CD× 1
Warranty Card ×1
Connect a display device to the video output interface.
1.
Connect a router to the LAN interface. In addition, connect the router
to a IPC device and a computer so that they are in the same LAN.
2.
Connect a mobile storage device, for example, USB drive or mobile
hard drive, to the USB interface.
3.
Connect a mouse to the USB interface.
4.
Connect the power adapter to the power input interface.
5.
Installation Process
Prepare
Device Connection
Login
Setup Wizard
Manual Record
Remote Access
2. Login page.
Enter Username and Password, then click Login button.
Default username is admin with no password.
Default username is
admin with no password.
6. Click OK
3. Select the Channel
5. Select the Protocol
4. Input the Username and
Password of the IPC.
2. Click Format Local Disk
3. Click next
1. Select here
For the initial log in, the system will pop up a message for modifying
the username/password. Click OK button.
3.
After the NVR starts up successfully, the Power indicator LED
should be green. The startup page is displayed on the screen.
1.
After modifying the username/password, enter the Setup Wizard
interface.
4.
After the time settings, click next button.2.
Select the mobile storage device, then click the Format Local Disk
button to initialize the mobile storage device for recording.
3.
Select the Language. If you don’t want to use the Setup Wizard
next time, uncheck the Setup Wizard checkbox.
1.
Find the IP Camera in the IP Camera List, then click Finish button
to complete the setup wizard.
5.
1. Uncheck the checkbox
2. Select the Language
3. Click next
You can add the online IPC device for your NVR.4.
You can congure the following information of the IP Camera. Click
OK button which to go back to the Setup Wizard page.
The live view interface will show you the video image getting from
each IP Camera.
The Setup Wizard can walk you through some important settings of
the NVR.
HDMI Video Output
VGA Video Output
VGA HDMI
Package Contents
1. Input the new username , new
password and conrm password.
2. Click OK
1. Select the IPC
2.Click Add
Click Finish
EQ300404
ShenZhen Foscam Intelligent Technology Co., Ltd
www.foscam.com
POWER Status Indicators
Power Supply
USB Interfaces
LAN Interface
USB1 USB2
POWER
LAN
3 Login
2 Device Connection
4 Setup Wizard
1 Before You Start

Foscam FN3004H Specifications

General

Brand	Foscam
Model	FN3004H
Category	Network Hardware
Language	English