Fosmon C-10749US - User Manual

C-10749 User Manual
Size 85 mm (H) x 40 mm (L)
Folded
Fosmon 24-Hour Timer with
1 On/O Program Setting
User Manual
Go to fosmon.com for video instructions
Thank you for purchasing this Fosmon
product. For optimum performance
and safety, please read this user manual
carefully before operating and keep it
for future reference.
Fosmon’s Indoor Digital Timer will allow
you to schedule one on/o program
and the program will repeat every day.
The timer will save your money and
energy by always turning on/o your
lamps, electrical appliances, or
decoration lighting on time.
- 2x 24-Hr Programmable Timer
- 1x User Manual
Power 125VAC 60Hz
Max. Load 15A General Purpose or Resistive
10A Tungsten, 1/2HP, TV-5
Min. Setting Time 1 Minute
Operating Temperature -10°C to +40°C
Accuracy +/-1 Minute Per Month
Battery Backup NiMH 1.2V > 100 Hours
Package Includes
Product Diagram
1. Charging the battery: Plug the timer
into a regular 125 Volts wall outlet for
approximately 10 minutes to charge
the memory back-up battery.
Note: You can then unplug the timer from the
power outlet and comfortably hold it in your hand
to program the timer.
2. Timer reset: Clear any previous data in
memory by pressing R button after
charging.
3. 12/24 hour mode: The timer by default
is 12-hour mode. Press ON and OFF
button simultaneously to change to
24-hour mode.
4. Set time: Press and hold TIME button,
and then press HOUR and MIN to set
current time.
Initial Setup
1. Press and hold ON button, and then
press the HOUR or MIN to set ON
program.
2. Press and hold OFF button, and then
press the HOUR or MIN to set OFF
program.
On
Time
Hour
Min
Mode
O
R
To Program
1. Plug the timer into a wall outlet.
2. Plug a home appliance into the timer,
and then turn on the home appliance.
To Connect the Timer
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
FCC Information
Visit fosmon.com/warranty for Product
Registration, warranty and limited liability
details.
Limited Lifetime Warranty
To dispose this product properly, please
follow the recycling process regulated in
your area.
Recycling the Product
1. Do not plug one timer into another timer.
2. Don’t plug in an appliance where the load
exceeds 15 Amp.
3. Always ensure the plug of any appliance is
fully inserted into the timer outlet.
4. If cleaning of the timer is required, remove
the timer from mains power and wipe it
with a dry cloth.
5. Do not immerse the timer in water or any
other liquid.
6. Heaters and similar appliances should
never be left unattended during
operation. The manufacturer recommends
such appliances not to be connected
with timers.
Caution
Press MODE button as necessary to display:
“ON” – the plugged in device remains ON.
“OFF” – the plugged in device remains OFF.
“TIME” – the plugged in device follows your
programmed timer setting.
To Operate
Specications
Follow Us On Social Media
www.fosmon.com
support@fosmon.com
© 2019 Fosmon Inc. All rights reserved.
There are good days and there are bad days.
It is our BAD if the product is not working,
or if you are not happy with it.
Contact us:
Toll Free: (833)-3-Fosmon (+1-833-336-7666)
Direct: (612)-435-7508
Email: support@fosmon.com
PLEASE GIVE US A CHANCE and
WE WILL MAKE IT RIGHT
DO NOT RETURN THE PRODUCT
STOP

Summary

Initial Setup

Charging the Battery

Plug the timer into a wall outlet for approximately 10 minutes to charge the memory back-up battery.

Timer Reset

Clear previous data in memory by pressing the R button after charging.

12;24 Hour Mode

Change the display mode by pressing ON and OFF buttons simultaneously.

Set Current Time

Press and hold TIME button, then press HOUR and MIN to set the current time.

To Program

Set ON Program

Press and hold ON button, then press HOUR or MIN to set the ON program.

Set OFF Program

Press and hold OFF button, then press HOUR or MIN to set the OFF program.

To Operate

Display Modes

Select between ON, OFF, or TIME mode using the MODE button.

To Connect the Timer

Plug Timer into Outlet

Insert the timer into a wall outlet before connecting an appliance.

Plug Appliance into Timer

Connect the home appliance to the timer and turn it on.

Caution

Timer Interconnection

Do not plug one timer into another timer to avoid potential issues.

Load Limit

Do not plug in appliances exceeding the 15 Amp load limit.

Plug Insertion

Ensure the appliance plug is fully inserted into the timer outlet.

Cleaning

Remove the timer from power and wipe with a dry cloth if cleaning is required.

Fosmon C-10749US Specifications

General

Brand	Fosmon
Model	C-10749US
Category	Timer
Language	English