101
MR-8mkII Owner’s Manual (Track data editing)
4) Rotate the JOG dial to select"Change Track >", and
press the [MENU/ENTER] key.
5) Rotate the JOG dial to select "Source Track = *",
and press the [MENU/ENTER] key.
You can now select the desired exchange source
track(s) by rotating the JOG dial.
The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6 and 7/8 (stereo tracks)
6) Rotate the JOG dial to select the source track(s),
and press the [MENU/ENTER] key.
You can now select the desired destination
track(s).
The display now shows the screen for select-
ing the source track(s) and destination track(s)
of the exchange operation.
You can exchange whole data (from ABS ZERO to REC END) between the desired track(s).
<Note>:
You cannot exchange track data of a song
protected. Release the protection before exchang-
ing track data.
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
ABS ZERO REC END
1) Load the song you want to edit.
2) While the recorder is stopped, press the
[MENU/ENTER] key to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "<< Back" is
highlighted initially (selecting "<< Back"
returns to the previous screen).
3) Rotate the JOG dial to select "Track Edit >", and
press the [MENU/ENTER] key.
The display now shows the track edit menu
screen, where "<< Back" is highlighted.
Exchanging whole track data
"Source Track" selects the exchange source
track(s), while "Dest. Track" selects the ex-
change destination track(s).
flashing
flashing
flashing
To Next Page
Loading...
Need help?
General
