60
MR-8mkII Owner’s Manual (Using effects)
The [INPUT A] channel of the MR-8mkII provides two types of insert effects: microphone and
amplifier simulation effects. These effects can be used during recording.
These effects simulate popular microphones and guitar amplifiers. If you use the microphone
simulation effect when you record an acoustic guitar through your microphone, you can make
recording as if you are using a famous microphone. If you use the guitar amplifier simulation
effect when you record an electric guitar directly connected to the MR-8mkII, you can make
recording as if you are using a famous guitar amplifier.
Note that you cannot get exactly the same sound as the original microphone/guitar amplifier by
using simulation effects.
You can use mic simulation effects when the [INPUT A SELECT] switch on the rear panel is set to
"MIC/LINE".
By pressing the appropriate key, you can
choose from among three mic simulation ef-
fects: DYNAMIC, CONDENSER and TUBE (the
indicator of the key lights up).
• Details of each mic simulation effect
DYNAMIC
CONDENSER
TUBE
Simulates the sound of a popular dy-
namic microphone.
Simulates the sound of a popular con-
denser microphone for professional use.
Simulates the sound of a popular tube
microphone for professional use.
Set to the "MIC/LINE"
position
BRIT STACK US METAL 60'S COMBO
MIC
TUBECONDENSERDYNAMIC
INPUT A
AMP SIMULATION
MIC SIMULATION
INPUT A SELECT
INT MIC
GUITAR
MIC/LINE
“DYNAMIC”
“CONDENSER”
“TUBE”
Mic simulation effects
Amp simulation effects
You can choose from three guitar amp simu-
lation effects: BRIT STACK, US METAL and 60's
COMBO (the selected key lights up).
• Amp simulation effects details
BRIT STACK
US METAL
60’s COMBO
Simulates a popular British 800-series
tube guitar amp head.
Simulates a popular US high gain metal
guitar amplifier.
Simulates a popular tube combo guitar
amplifier.
Set to the "GUITAR"
position
BRIT STACK US METAL 60'S COMBO
MIC
TUBECONDENSERDYNAMIC
INPUT A
AMP SIMULATION
MIC SIMULATION
“BRIT STACK”
“US METAL”
“60”s COMBO”
You can use mic simulation effects when the [INPUT A SELECT] switch on the rear panel is set to
"GUITAR". When the switch is set to "GUITAR", you can also use the distortion (adjusted by the
[DISTORTION] control), as well as the insert effects.
Using the insert effects
INPUT A SELECT
INT MIC
GUITAR
MIC/LINE
<Note>:
When you use the internal microphone
by setting the [INPUT A SELECT] switch to the “INT
MIC” position, the insert effects are not available.
To Next Page
Loading...
Need help?
General
