Fostex VM200 - Page 4

4
VM200
1. SPECIFICATIONS
DEFINITION
Specification Unit 0 dBV = 1 Vrms
Standard Input (Impedance)
MIC -60 dBV, -34 dBV (3 kΩ or more)
LINE -10 dBV (10 kΩ or more)
INSERT -10 dBV (20 kΩ or more)
2TRACK IN -10 dBV (10 kΩ or more)
EFFECT RETURN At 70 ~ 90 % position
DATA OUT
S/P DIF IN IEC 60958 (S/P DIF)
ADAT IN Alesis Proprietary Multi Channel Digital Interface
Standard Output (Impedance)
STEREO -10 dBV (10 kΩ load or more)
MONITOR -10 dBV (10 kΩ load or more)
AUX -10 dBV (10 kΩ load or more)
REC BUSS -10 dBV (10 kΩ load or more)
HEADPHONE 50 mW or more (33 Ω load)
STANDARD FADER POSITION
STEREO BUSS Set the INPUT / MASTER faders at “0” position when -10 dBV / 1 kHz
signal is fed to the INPUT (INSERT) jack (TRIM: MIN, PAN: L (R),
EQ: OFF).
MONITOR Set the MONITOR VR so that -10 dBV output is obtained at MONITOR
OUT when -10 dBV / 1 kHz signal is fed to the INPUT (INSERT) jack.
OUTPUT LEVEL
INPUT (1 ~ 8)
→→
→→
→ STEREO -10 dBV +2, -1 dB (Standard fader position)
INPUT (1 ~ 8)
→→
→→
→ MONITOR -10 dBV +2, -1 dB (Standard fader position)
FREQUENCY RESPONSE
INPUT
→→
→→
→ MONITOR OUT
Input: -60 dBV 20 ~ 20 kHz +1, -3 dB
Input: -10 dBV 20 ~ 20 kHz +1, -3 dB
INPUT
→→
→→
→ STEREO OUT
Output: -10 dBV 20 ~ 20 kHz +1, -3 dB
INPUT
→→
→→
→ PHONES
Output: 50 mW / 33 Ω 50 ~ 20 kHz +1, -3 dB
EQUALIZER
HI / HI MID / LOW MID / LOW
+18 +18 dB ± 3 dB
-18 -18 dB ± 3 dB
S/N
Residual Noise
AUX 1 ~ 4
→→
→→
→ ST BUSS OUT -88 dBV or less (All input / master faders: MIN)
-75 dBV or less (All input / master faders: At 0 dB)
MIC
→→
→→
→ INSERT -68 dBV or less (GAIN: MAX, PAD: OFF, Rs: 150Ω)
MONITOR OUT (VR: MIN) -100 dBV or less
PHONES -95 dBV or less (VR: MIN)